CMD Codes To Get PC Information

Open CMD in administrator mode, copy and paste the following codes into CMD to get relavent information.
Then copy from CMD to Text file or any other file.
Refer to the Form Factors and Types to get the Memory Details after using the codes Form Factor and Memory Type.

 

 CODESMEMORY FORM FACTORSMEMORY TYPES
Windows Product KeySupported form factorsSupported types
wmic path softwareLicensingService get OA3xOriginalProductKeyForm factors the command can identify:Memory types the command can identify:
PC Serial #    0: Unknown.    0: Unknown.
    1: Other.    1: Other.
wmic bios get serialnumber    2: SIP.    2: DRAM.
    3: DIP.    3: Synchronous DRAM.
System Information    4: ZIP.    4: Cache DRAM.
    5: SOJ    5: EDO.
systeminfo    6: Proprietary.    6: EDRAM.
    7: SIMM.    7: VRAM.
To get Hard Drive information    8: DIMM.    8: SRAM.
    9: TSOP.    9: RAM.
wmic diskdrive get model,serialNumber,size,mediaType    10: PGA.    10: ROM.
    11: RIMM.    11: Flash.
MEMORY (THERE IS A FEW)    12: SODIMM.    12: EEPROM.
    13: SRIMM.    13: FEPROM.
Manufacturer    14: SMD.    14: EPROM.
    15: SSMP.    15: CDRAM.
wmic memorychip get devicelocator, manufacturer    16: QFP.    16: 3DRAM.
    17: TQFP.    17: SDRAM.
Part Number    18: SOIC.    18: SGRAM.
    19: LCC.    19: RDRAM.
wmic memorychip get devicelocator, partnumber    20: PLCC.    20: DDR.
    21: BGA.    21: DDR2.
Serial Number    22: FPBGA.    22: DDR2 FB-DIMM.
    23: LGA.    24: DDR3.
wmic memorychip get devicelocator, serialnumber    24: FB-DIMM.    25: FBD2.
    26: DDR4.
Capacity
wmic memorychip get devicelocator, capacity
Total System Capacity
systeminfo | findstr /C:”Total Physical Memory
Module Speed
wmic memorychip get devicelocator, speed
Memory Type
wmic memorychip get devicelocator, memorytype
Form Factor
wmic memorychip get devicelocator, formfactor
Full Memory Specifications
wmic memorychip list full